Stay Parts processing and customized service center ， The lubricating parts of the machine tool must be oiled regularly according to the lubrication drawing ， The injected lubricating oil must be clean 。 The lubricating part shall be oiled once a week ， Find out the law of fuel consumption ， In case of any decrease in oil supply, the maintenance personnel shall be informed in time for maintenance 。 Machining of mechanical parts The operator should pay attention at any time CRT Moving axis monitoring screen on the display ， When abnormal phenomena such as current increase are found ， Inform the maintenance workers in time for maintenance 。 The maintainer shall check the lubricating oil distribution device once a year ， Dredge or repair in time in case of oil blockage or leakage 。

　　 Stay Parts processing and customized service center ， The lubricating oil in the base must be added to the highest line of the oil mark ， To ensure the normal operation of lubrication 。 Therefore ， The oil level must always be checked for correctness ， Lubricating oil should be 5~6 Replace once a month 。 Due to the large initial wear of all parts of the new machine tool ， Therefore ， The time of the first and second oil change shall be advanced to once a month ， In order to remove the dirt in time 。 After the waste oil is discharged ， Inside the box ( Including headstock and oil tank in the base ) Clean with kerosene ， Clean or replace the oil filter at the same time 。

　　 Stay Parts processing customization In process ， Sealing of pneumatic system is very important 。 When the air enters the reversing valve, it will adhere Stay Valve center ， Gradually reduce the sensitivity of the valve ， Even present action failure 。 To remove sludge ， Guaranteed sensitivity ， After the filter of the pneumatic system ， Installing oil mist separator ， Separate the sludge 。 In addition ， Regular cleaning of the hydraulic network can also ensure the sensitivity of the valve 。

　　 Ensure that the pneumatic device has proper working pressure and moving speed ， When adjusting the working pressure ， Pressure gauge should be reliable ， Accuracy of reading 。 After the pressure reducing valve and throttle valve are adjusted ， The pressure regulating valve cover or lock nut must be tightened ， Prevent loosening 。 Check whether the pressure of compressed air is normal every day ； Filter needs manual drainage ， Once every two days in summer ， Once a week in winter ； Check whether the lubricating oil in the lubricator is used up every month ， Add lubricating oil of specified brand in time 。